With this jaw you can clamp parallel premachined workpieces with a length of min. 0 - max. 69 mm. / ATTENTION: on the TeleCentric 70M the Clamping range adapter is required to clamp to 0. The dowel pins serve as bearing surface and can be set at a height of 176mm and 191mm. Minimum clamping edge loss: 20 mm at height 176 mm / 5 mm at height 191 mm Material: hardened steel Case-hardened and tempered 720 + 50 HV10; hardening depth = 0,7 + 0,3 Inclusive 4 dowel pins 4x10 DIN EN ISO 8734